Operating Manual
10
1300-87075-1A
This screen will allow you to select the settings that
control the sealing time, temperature, ECO time and
scan a copy of the user manual through the QR code
displayed. After clicking settings, you will be shown this
screen, simply click the o
To adjust the set temperature of the heater block and
control the temperature that the Genoseal seals at, click
the first option showing a thermometer. Here you can
adjust the temperature up or down with the arrows on
the right side of the display. Once satisfied with the set
temperature, press “save”.
You can also adjust the sealing time by pressing the
stopwatch icon on the settings screen. Press it and adjust
it using the arrows on the right side of the display. Once
satisfied with the set sealing time, press “save”. If you
want to keep the time unchanged, press “cancel”.
To access the eco-mode timer, press the icon that shows
the flower in a light bulb icon from the settings screen.
This will enable you to set a time limitfor how long the
unit is not in use before automatically turning off the
heaters and going into eco-mode. Use this screen similar
to how you set the temperature and time.
This will show you the QR code which is scannable with
any QR code scannable smart phones or QR scanners
for a desktop view. It will load a PDF in your default PDF
viewer.
If the unit encounters an error at any stage, it will display an error
screen prompting you to power cycle the machine or reset it. (Error
screens may vary.)
