Sperry Marine VISIONMASTER FT ECDIS-E, Руководство пользователя

Страница: 296 / 425

Routes ECDIS-E User Guide
8-16 65934012
To edit the Waypoint data do the following:
The Waypoint area displays the waypoint currently selected (e.g. WPT3).
To select the previous waypoint in the route click the
<
button, to select the
next waypoint in the route click the
>
button. To select the first waypoint in
the route plan click the
<<
button, or to select the last waypoint in the route
click the
>>
button.
To enter a label for the waypoint:
1. Left click in the blank field to the right of the currently selected
waypoint, the screen keypad appears.
2. Enter an identifying label using the keypad and click OK . The
name appears in the label field, and if the Waypoint Label tick box
is enabled in the Route Display Settings, also on the route plan.
To create a new waypoint:
1. Navigate to the location in the route where you want the new
waypoint created and left click on either the previous waypoint or
the next waypoint and then click the
New button. The system
creates a new waypoint on the route leg midway between the
selected waypoint and next waypoint i.e. if
WPT1 is selected then
the new waypoint becomes WPT2 and all subsequent waypoints
are automatically re-numbered.
2. Move the waypoint to the required position, either directly on
screen, or by specifying its position numerically, see below.
To delete a waypoint:
Navigate to the waypoint to be deleted using the navigation buttons
and click the
Delete button. The system deletes the selected
waypoint from the route, the route is re-drawn and all subsequent
waypoints are automatically re-numbered.
To specify a waypoint Latitude/Longitude (L/L) position:
1. Select the waypoint by using the Waypoint navigation buttons.
2. To centre the display on the selected waypoint click the Goto
button.