Sperry Marine 4914-CA, Руководство по эксплуатации, установке и обслуживанию

Страница: 56 / 192

MRSPQPLc k^sfd^q u jh N
PJO ^ÅâåçïäÉÇÖáåÖ=^ä~êãëLjìíáåÖ=íÜÉ=^ìÇáÄäÉ=^ä~êã
PKO ^ÅâåçïäÉÇÖáåÖ=^ä~êãëLjìíáåÖ=íÜÉ=^ìÇáÄäÉ=^ä~êã
^ä~êã=^ÅâåçïäÉÇÖÉ
^ä~êã=jìíÉ
To acknowledge a pending alarm at the NAVIGAT X MK 1:
Press pÜáÑíJcN .
⇒
The alarm message is cleared and the audi-
ble alarm is muted.
As long as the cause of the alarm is present, the
alarm remains “active”.
The currently active alarms may be viewed in
the error list in the ‘Service Setup 2 – Overview”
on page 8-21.
MK2 HEADING
>F1 GYRO 1 271.2
°
F2 MAGN.C. 270.9
DIFF G1/M 5
°ü
GYRO FAILURE
F1 CONFIRM
kçíÉ When an alarm has been acknowledged, the external alarm status output
remains active until the cause of the alarm is eliminated.
When the cause of an alarm is eliminated, the alarm is acknowledged
automatically and the alarm status is cleared.
The NAVIGAT X MK 1 does not keep a history of past (inactive) alarms.
Active alarms are only kept temporarily in an error list (see table 3-1 on
page 3-3) as long as the alarm remains active.
To mute the audible alarm at the NAVIGAT X MK 1:
Press pÜáÑíJoÉëÉí .
⇒
The audible alarm indication is muted.
The visible alarm indication is not cleared and
the alarm remains in the pending state until it is
acknowledged by the operator.
GYRO FAILURE
F1 CONFIRM
GYRO FAILURE
F1 CONFIRM