Sperian MILLER TWIN TURBO, Руководство пользователя

Страница: 9 / 36

U s e r I n s t r u c t i o n s - E n g l i s h
9
TO REMOVE D-RING CONNECTOR FROM D-RING, REVERSE STEPS 1-7.
D-Ring
Pin
Step 7
Rotate D-Ring Pin Retainer Clockwise until fully seated against top of
D-Ring Connector. (should cover back of D-Ring Pin)
D-Ring Pin
D-Ring Pin Knob
A.
B.
D-Ring Pin
Retainer
Step 3
(a) Tilt D-Ring Connector back to allow D-Ring Pin
to slide clear of the D-Ring Slot.
(b) Rotate D-Ring Pin Retainer against D-Ring
Pin to hold in place.
Step 4
Insert Back D-ring into slot until fully engaged
and seated against the bottom of the slot.
Step 5
Push D-Ring Pin through D-Ring opening until in
contact with threads of D-Ring Pin Knob.
Step 6
While holding D-Ring Pin against threads,
rotate D-Ring Pin Knob Clockwise and tighten.
Back
D-ring
D-ring
Slot
D-Ring Pin
Retainer
WARNING:
Do not use
unless D-Ring
Pin Retainer is
fully closed.