manualshive.com logo in svg

Sper scientific 800050, Инструкция по эксплуатации

Поделиться
Скачать
Sper scientific 800050 Скачать руководство пользователя страница 9

9

seconds. “CAL” will appear on the LCD. 

3.  The meter will display a countdown from 60, as it needs 

60 seconds to calibrate, as well as “400” in the middle of 

the screen.

4.  Once completed, the meter will reset and the current 

readings will now display.

MEASUREMENT PROCEDURES

For the most accurate measurement, do not place the 

meter close to any source of CO2.

Note… 

Measurement response time is 10 seconds for CO2 and 

2 seconds for RH. If the operating environment changes, 

it takes approximately 30 seconds for the CO2 sensor to 

respond and 30 minutes for the RH sensor to stabilize.

1.  Turn the meter 

ON

 by pressing 

PWR

.

2.  The meter will warm up briefly and the reading will 

be displayed. Due to the CO2 NDIR sensor, it takes 

approximately 10 minutes to get stable readings.

3.  To change the temperature scale, press 

UNIT

 to cycle 

the display between °C and °F.

Содержание 800050





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды