manualshive.com logo in svg

Sper scientific 800050, Инструкция по эксплуатации

Поделиться
Скачать
Sper scientific 800050 Скачать руководство пользователя страница 21

21

DATA SAMPLING AND RECORDING
Note… 

When the meter is disconnected from the computer, a “No 

port found” error message will display. This will not affect the 

data sampling and recording. Click “OK” 

 

to continue.

 

Sampling and Recording in Immediate Mode 

1.  The green LED will flash to indicate that the meter 

 

is recording data.

2.  Disconnect the USB cable from the computer and meter. 

Recording will continue.

3. Place the meter in the desired location for sampling.
4.  The datalogger will record up to 32,000 data points.  

Once the memory is full, recording will stop.

 

Sampling and Recording in Roll Over Mode

1.  The green LED will flash to indicate that the meter 

 

is recording data.

2.  Disconnect the USB cable from the computer and meter. 

Recording will continue.

3. Place the meter in the desired location for sampling.
4.  The meter will record up to 32,000 data points. 

 

When the memory is full, the meter will continue recording 

over the oldest records.

Содержание 800050





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды