manualshive.com logo in svg

Sper scientific 800050, Инструкция по эксплуатации

Поделиться
Скачать
Sper scientific 800050 Скачать руководство пользователя страница 23

23

DOWNLOADING DATA

1.  Connect the mini-USB end of the cable to the 

corresponding port on the side of the meter.

2.  Insert the USB cable into the USB port on your computer.
3.  Open the Start Menu and select the “Data Logger” 

 

Icon from the programs list.

4.  The USB Data Logger Meter screen displays.  
5.  Click the “LOGGER Status” button to finish recording. 

The datalogger ID, number of records sampled, and the 

sampling parameters and rate will display.

6.  Click the “Download” button to download the data.  

 

A graph of the data will display.

 

Viewing the Graph
Note… 

To display the values for a specific data point, click the left 

mouse button to move the red cursor (located on the red 

vertical line) to the desired point on the graph. You may also 

hold down the left mouse button and drag the cursor to the 

desired point.
• To zoom in: Hold CTRL and click the left mouse button.
•  To zoom out: Hold CTRL and click the right mouse button. 
•  To move the graph: Hold CTRL and Shift and then 

 

click and hold the left mouse button. Use the cursor to 

 

move the graph.

Содержание 800050





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды