Sper scientific 800050, Инструкция по эксплуатации

Страница: 11 / 28

11
Viewing Wet Bulb & Dew Point
The meter defaults to display CO2 levels, along with the
RH & Temp. The RH and Temp interchange below the
CO2 reading. You can alternatively view the Dew Point or
Wetbulb.
1. While the meter is ON , push MODE .
2. Dew Point (DP) will show.
3. Press
MODE again to view Wet Bulb (WB)
4. Press MODE again to return to viewing RH & Temp.
Auto Power Off
The meter will automatically turn off after 15 minutes if
there has been no use. To disable the auto power off
function do the following:
1. Turn the meter
OFF .
2. Press and hold the
HOLD
button.
3. While holding down HOLD , press PWR to turn the meter
on. The letter “ n ” will show on the screen, and the meter
will turn on.
Note...
Every time you turn the meter off, the meter will reset to it’s
default. You must disable Auto Power Off every time you
turn the meter on.