7
Property damage due to
missing sealing plug
- Will the cable entries in the case not or only
insufficiently with the supplied sealing (DMS)
plug covered, the specified protection class
is no longer guaranteed. There may be
consequential damage to the electronic
components.
»
Cover the cable entries in the
enclosure with supplied DMS.
- Never touch the charging cable if the
connector is smoking or has melted.
Stop the charging process if possible.
- Make sure that the charging cable is out
of the reach of children.
- Avoid loads and impacts.
- Do not pull the charging cable over sharp edges
- Do not knot the charging cable, avoid kinks.
- Completely unwind the charging
cable when charging.
- Do not put the charging cable under tension.
The charging plug can be damaged by
environmental influences.
- Always put the protective cap on the
vehicle charging plug when it is not in use.
- Alternatively, you can put the vehicle
charging plug into a plug holder,
which is available as an accessory.
Storage
- Keep the device and the charging cable
and the accessories before assembly
on a dry and clean place.
- Please store the charging station
in the original packaging.
Cleaning
There is a risk of electrocution when wor-
king on the electrical components of the
wallbox.
- Only clean the charging cable when it
is not connected to the vehicle.
- Only clean the outside of the wallbox
and the charging cable.
Unsuitable cleaning agents can
damage the wallbox.
- Do not use any sharp or hard
objects for cleaning.
- Do not use water or a steam jet cleaner.
- Clean the wallbox and the charging
cable with a soft, dry cloth.
- If necessary: Clean the wallbox with a soft,
damp cloth. Stubborn dirt can be removed
with a mild, solvent-free, non-abrasive
cleaning agent.
Transport
Material damage due to improper
transport.
- Avoid collisions and bumps.
- Product packed up to the place of
installation transport.
- Make sure, that the packaging seal
is undamaged.
- Make sure that the adhesive foil
on the design cover is undamaged.
Do not remove it until the
design cover is mounted.
