31
Charging
- Switch off the vehicle.
- Fully unwind the charging cable.
- Take the protective cap off the vehicle
charging plug.
- Insert the vehicle charging plug into
the vehicle inlet.
- Make sure the connector is correctly
and completely plugged in.
- Authorise the charging process at the
wallbox if necessary.
- Start the charging process on the vehicle.
»
The vehicle inlet locks the charging plug
with an internal locking actuator.
To end the charging process, follow the
operating instructions of the electric vehicle.
»
The duration of the charging process
depends on the capacity and state of charge
of the vehicle’s high-voltage battery and on
the permissible charging power and
parameters of the wallbox. The electric
vehicle selects the actual charging power
based on capacity and other parameters.
»
During charging, the status LED of the
wallbox pulses green.
