LPX-200
Industrial Imaging System
2-6
Chapter 2: Preparation for Use and Shipment
Specifications - General Tubehead
The following outlines the general operating specifications of
the Tubehead Assembly.
❏
Physical Specifications _____ Water Cooled: 8.5" dia. x 26.5"
length - 32lbs (approx); Air
Cooled: 8.5" dia. x 29" length -
36 lbs (approx)
❏
Anode Cooling System _____ Recirculating Liquid Cooling unit
or Fan Forced Air
❏
Radiation Output __________ 20R/minute @200kV, 4.5mA @
50cm through 0.5 in. of
Aluminum
❏
Leakage Radiation _________ 0.8 R / hr
❏
Tube Pressure Sense _______ Monitors pressure of the SF6 gas
within the Tubehead. Shuts unit
down if pressure falls below 25
psi.
❏
Anode Thermal Sense ______ Monitors temperature of the X-ray
Tube Anode. Shuts down unit if
Anode temperature rises above
220
°
F.
❏
Pressure Relief Valve _______ Automatically releases SF6 gas
from Tubehead if pressure rises
between 75 - 80 psi.
❏
Pressure Gauge ___________ Displays SF6 gas pressure within
Tubehead. Used in conjunction
with Temperature Compensation
chart to visually inspect Tubehead
pressure.
Specifications - Optional Tubehead
The information that follows furnishes the specifications for
several available Tubehead assemblies. Figure 2-4 illustrates
the direction of the X-ray beam for both the 40
°
x 60
°
cone
and the 360
°
panoramic models.
❏
Tubehead 40
°
x 60
°
Cone ___ Air or liquid cooled models;
1.5mm Focal spots; 1mm
beryllium window
❏
Tubehead 360
°
Panoramic __ Liquid cooled, 0.4mm x 4.0mm
focal spot, 0.4 Fe/Ni/Co window
only
Figure 2-4:
X-ray Beam Path
DIRECTIONAL TUBE HEAD
DIRECTIONAL TUBE HEAD
PANORAMIC (360˚)TUBE HEAD
60˚
40˚
44˚
Содержание LORAD LPX-200
