manualshive.com logo in svg

Spektrum FC6250HX, Руководство пользователя

Поделиться
Скачать
Spektrum FC6250HX Скачать руководство пользователя страница 12

EN

12

Mixing
P-Mix 1 

Normal
Channels

Ger > Gyr

Rate

125%/0%

Offset

–100%

Switch

Switch I

Position

0

1

Calibration

The FC6250HX is calibrated at the factory. Recalibrate the unit if the panic 

or stability functions do not return to level or if there is a slow drift in the roll, 

pitch, or yaw axis:
Firmware Version 5.4 or earlier the FC6250HX must be label up and level 

during calibration. With v5.4 it is not necessary to calibrate the sensor when 

the sensor orientation is changed.
Firmware Version 5.5 or newer the calibration is performed in the selected 

mounting orientation with the FC6250HX side facing upward being level. 

When changing the mounting orientation setting in v5.5 the system will ask 

you to calibrate the gyro. Once the model is level select Apply to complete the 

calibration step.
The firmware version is shown at the bottom of the forward programming 

screen.

The SAFE Panic Recovery function is activated by setting up the following mix 

within the transmitter:

To activate the SAFE Panic Recovery function, move the collective stick to the 

center position and press the bind button (switch I) on your transmitter. 
The SAFE Stability function can be enabled within the forward programming 

SAFE menu. All gains, flight mode setup, envelope and gain settings are avail-

able within the SAFE menu. To enable or disable the stability function per flight 

mode set the FM Channel to the appropriate channel within the Setup menu. 

Содержание FC6250HX





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды