Speedtouch 780 WL, Инструкция по установке и настройке

Страница: 18 / 52

12
E-DOC-CTC-20060209-0004 v1.0
Chapter 2
Basic Installation
3
Make one of the following connections:
Connect the yellow RJ-45 Ethernet cable to the Ethernet port on your
SpeedTouch™ and the other end to the computer’s Ethernet port.
Connect the USB cable to the indicated USB port on your SpeedTouch™
and the other end to the computer’s USB port.
For wireless networking, plug a wireless card or adapter into your
computer.
4
Once the hardware is installed and connected to the SpeedTouch™, the
procedure continues with configuring your Internet connection.
Proceed with “ Configuring the Internet connection” on page 13 .
In case of problems or for advanced information, see
“2.4.1 Installing USB drivers” on page 22 .
In case of problems or for advanced information, see
“2.4.2 Wireless Setup” on page 24 .
If the wizard does not detect a connection, an error message will be
displayed. Refer to
“ The wizard does not detect a connection” on
page 38 .