Speedtouch 780 WL, Инструкция по установке и настройке

Страница: 11 / 52

5
E-DOC-CTC-20060209-0004 v1.0
Chapter 2
Basic Installation
2 Basic Installation
Before you begin
Make sure you read the safety instructions and regulatory notices first. You can find
the safety instructions on the Setup CD (see
“2.1 Installing your SpeedTouch™” on
page 7 ). They may also be provided as a printed booklet.
ADSL service
The ADSL service must be up and running on your telephone line.
If both conventional telephone and ADSL service are simultaneously available from
the same copper pair, you will need a central splitter or distributed filters for
decoupling ADSL and telephone signals.
Computer requirements
To connect computer(s) via Ethernet, make sure the computer are equipped
with an Ethernet network interface card (NIC).
To connect a computer via USB, you need a free USB port on the computer or
a connected USB hub.
For wireless networking, you will need a wireless 802.11 b/g compatible client
adapter for each computer you intend to connect wirelessly.
Wireless client
adapters
You can use one of the following wireless client adapters:
SpeedTouch™110g CardBus
SpeedTouch™121g USB adapter
Any other Wi-Fi certified WLAN client
Internet connection
details
You need the following connection details from your Internet Service Provider (ISP):
Your ISP’s method for connecting to the Internet (for example PPPoE)
The VPI/VCI (for example 8/35)
Your user name and password to connect to the Internet
You must have received this information when you subscribed to DSL at your
Internet Service Provider (ISP). You will be prompted for this information at a given
step in the installation procedure.
!
Public telephone lines carry voltages that can cause electric shock. Only try
to set up splitter/filters that have been designed to be installed by
unqualified personnel. For further assistance, contact your Internet Service
Provider.