Page 38 of 55
The operation of adding layer is similar to the source selection, but different in the
purpose.
The user can add layer A or layer B, the BG layer is the default.
Figure 5-7 Configure Input Source Operation Flowchart
Steps:
(1) Add the layer press key A or key B in LAYER key area, then there will be the border
on the preview display.
(2) Add 1 to 4 key in the PREVIEW key area , then you can add the layer.
Tip: If you only press A or B key, without selecting input source, although the preview
display appear the border, you will not add the layer.
Delete Layer and Modify Layer Priority
Operations of deleting layer and layer priority will be operated in the same shortcut
key and shortcut key menu.
②
①
