Page 34 of 55
Steps: in the default cycle menu, first enter the factory reset menu in the system menu
(shown in Figure 5-1), and then press ENTER to reset.
Output Resolution Setting
The program output and preview output of DVX402 share the same resolution, and
see the following flowchart.
Figure 5-2 Modifying Output Resolution Flowchart
Steps: in the default cycle menu, the user should first enter the output menu (shown in
Figure 5-2) and then select the appropriate resolution, finally press ENTER to confirm.
Select
DVX402 has 4-channel inputs, each channel can also be configured to DVI, VGA,
VID and SDI. The information source is selected for the layer. Select the layer first, and
then select the input source. Before use the PROGRAM input keypad and PREVIEW input
keypad, each channel input source should be configured first.
1. Input Signal Configuration
System main
menu
Default cycle
Output
……
1920×1080@60Hz
1920
×
1200@60Hz
……
Confirmation
MENU
MA
+
ENTER
+
ENTER
ENTER
