
CJ-125 Operating and Maintenance Manual
4
1. 9647-1-S Cap
2. CJ2-01-S Water/
Chemical Tank
3. CJ2-14-S Shoulder Strap
4. 8940-200E-20FT
Self-Coiling Hose
5. CJ2-22 Power Switch
6. Battery Charging Jack
7. 8943-RB: Spray Gun with
Quick Disconnect
8. CJ2-04-S Battery Door
9. CJ-9613 12V / 15AH
Battery
10. CJ-QDN-0004R Pinpoint
Jet (red)
11. 8933-ASSEMBLY
Chemical Valve
Assembly
12. CJ-QDN-1504Y 15°
Rinsing (yellow)
The CoilJet® CJ-125 is shipped fully assembled. However, the battery leads need to be
connected before first use. Open the battery door, remove the battery, and connect the
leads – red wire to the positive terminal and black wire to the negative terminal.
NOTE: The battery should be fully charged before first use. When you first unpack the unit and
connect the battery, plug the charger into a 120V AC outlet and charge the unit until the light
on the battery charger is green.
Parts Breakdown
*Not Shown
CJ2-24
Battery Charger
CJ2-06-S Motor/ Pump
CJ2-07
Chemical Check Valve
CJ2-07-1 Water Check Valve
CJ2-17
15A Fuse
Assembly
CJ-125
CJ-125
1
2
3
4
5
6
7
8
9
10
11
12