Speed Touch 516, Инструкция по установке и настройке

Страница: 19 / 42

Chapter 2
Basic Installation
13
E-DOC-CTC-20051017-0035 v1.0
Configuring the Internet
connection
Proceed as follows:
1
If prompted, enter the User name and Password for your SpeedTouch™
security settings and click OK.
2
Select the appropriate Region, Provider and Service for your Internet
connection as specified by your Internet Service Provider and click Next.
3
Your connection to the Internet connectivity is set up:
Select the VPI/VCI - and, if required, the Connection Type - as specified
by your Internet Service Provider and click Next.
Enter the User Name and Password for your Internet account settings as
specified by your Internet Service Provider and click Next.
4
The procedure continues with some additional configurations.
Proceed with “ Configuring the SpeedTouch™ (and your computer)” on
page 14 .
The factory default user is ‘Administrator’ and its password is blank. It
is advisable to specify another user name and password to protect
your SpeedTouch™ from security violation during the configuration
procedure. See
“2.6 Basic Security” on page 21 for more information.
If the Internet Service Provider has included a separate disk with a
dedicated service profile, click Have Disk to browse to the location of
the appropriate service profile template file.
!
From here on, the procedure might differ from the description below.
The requested information will depend on the selected service profile
and should be provided by your Internet Service Provider. Subsequent
screens will guide you through the configuration of both the
SpeedTouch™ and your computer. Enter the requested information
and click Next whenever requested.