Figure 7
Door stop adjustment
If necessary, the upper and lower door stops can be repositioned
to adjust the closed position of the doors and lock rods.
1. To reposition the stop, loosen the Phillips screws slightly with
a screwdriver.
Figure 7
.
2. Move the stop forward or backward then retighten and check
the closed position of the door.
3. Repeat this process until the door and lock rods are aligned.
Phillips
screwdriver
Tools
Required
Brake lever
Caster operation
Figure 8
1. To lock the caster rotation, press the brake lever.
Figure 8
.
2. To resume operation, lift up on brake lever.
0103148R8 Page 8 of 11
Moving and parking the lectern
• Before moving, unplug and secure all power cords.
• Close and lock doors.
• Remove any items from the top of the worksurface.
• Unlock the casters.
• Push slowly and carefully. Do not move over uneven or irregular surfaces.
• Do not allow children to move.
• Lock the casters after moving.
•
Do not park unit in areas of heavy traffic.
• Do not run power cords across hallways, classrooms, or other areas where they will be walked on.
• Do not leave unit unattended in areas where children have access.
• Keep doors closed and locked whenever unit is unattended or parked.
• Keep casters locked whenever the lectern is unattended.
Door stop
