4mm Hex
wrench
(included)
Audience side panel removal
1. To access the upper keyboard / rack rail area from the back, remove
the (4) JC bolts and remove the audience side panel.
Figure 5
.
2. Replace the panel and tighten the JC bolts securely.
Figure 5
Audience
side panel
Attaching optional keyboard tray
1. Determine which side of the lectern you would like the keyboard tray.
2. Hook the keyboard slide/track into one of the pre-installed clips under the left or right side
of the worksurface.
Figure 6
.
3. Align the mounting holes with the pre-drilled worksurface holes.
4. Attach the slide/track to the worksurface using the (2) screws from the keyboard tray kit.
5. Slide the keyboard tray into the slide/track.
6. Refer to the keyboard tray instructions for remaining installation procedure.
Figure 6
Slide / track
Left slide/track clip
PHM screws
Phillips
screwdriver
Tools
Required
Tools
Required
Right slide/track clip
0103148R8 Page 7 of 11
JC bolt
