Keyboard Tray / Drawer
1. To remove, pull out the tray and locate the plastic lever on each slide.
Figure 3A
.
2. Release the levers (left-up, right-down) while pulling the tray out of the slides.
3. Flip the tray, re-align the slides, and push back in.
The tray can be used as a keyboard tray, or flipped and used as a drawer.
Quick-release door
The symmetrical door can easily be removed or switched to be hinged from
left or right using the quick-release hinge lever located on the door.
Figure 4
.
The nylon washer needs to be located on the bottom of the door.
Figure 3B
Figure 4
Figure 3A
0119327R1 Page 5 of 18
Keyboard
Tray
Nylon bushing on
lower hinge pin
Lower quick-release
lever
Upper quick-release
lever
Door
Left slide
Right slide
