Assembly / Setup
0119327R1 Page 3 of 18
1. Align the two audience-side skirt keyhole slots with
the two pre-installed screws.
Figure 1A
.
2. When engaged, pull the skirt away from the lectern
to lock in place.
A
1. Install 3-piece skirt
Right-side
skirt
Audience-
side skirt
1. Align the keyhole slots on each side skirt with the
pre-installed screws.
Figure 1B.
2. Pull each side skirt toward the audience-side to lock
into place.
1. With the side skirt and base holes aligned, install a 1/4-
20 x 1-1/2” PHM screw through the top of the base to
secure each side skirt.
Figure 1C.
Starting the screw
by hand will help locate the threaded hole in the skirt.
2. Tighten screws securely.
B
C
Figure 1A
Figure 1B
Figure 1C
Tools
Required
Phillips
screwdriver
Left-side
skirt
Base Panel
Base Panel
Door
1/4-20 x 1-1/2” PHMS
Side skirt
Note: The skirt is designed to be installed
with the lectern in the upright position.
Do not tip or flip the lectern in any way.
Door
Keyhole slot
Keyhole slot
Base Panel
