0190035R1 Page 4 of 8
1. To install a Cove module, route power cord through worksurface cutout
2. Place module into cutout and secure with thumbscrews.
Figure 3C-3D
.
3. Install each cord clip with (1) #10 x 3/4” PHSM screw to secure the
power cord under the worksurface.
Figure 3E
.
Figure 3F
Power cord
routed to floor
Leg channel
(sold separately)
8. If you do not have the optional leg channel, use the included
hook and loop straps to secure cords to the leg.
Figure 3G
.
Figure 3G
Figure 3D
8. If equipped, route the cords through the leg
channel and down to the floor.
Figure 3F
.
Figure 3C
Power cord
routed to floor
Worksurface
cutout
Hook & loop
straps
Cove Module
Figure 3E
Cord Clip
(1) #10 x 3/4” PHSM
Power Cord
Power cord
Thumbscrews
Worksurface
Cove Module
