0190035R1 Page 2 of 8
1. Set a leg on each leg mechanism.
Figure 2
.
2. Attach each leg with the included hex screws (4 per leg) and hex wrench.
3. Tighten screws securely.
4. Be sure swivel wheels are tightened securely. (Tighten with 1/2”
wrench if necessary.)
5. If you have wire management accessories proceed with step 3-if not,
carefully tip the table upright-this will require two people.
Figure 2
Hex screws
(included with
legs-4 required)
Leg
Leg
Leg
mechanism
2. Attach legs