Spectrex SharpEye 40/40UFI Скачать руководство пользователя | Manualshive

Страница: 3 / 84

background image

Legal Notice

The SPECTREX SharpEye Optical Flame Detector described in this document is the property of Rosemount.

No part of the hardware, software or documentation may be reproduced, transmitted, transcribed, stored in a
retrieval system or translated into any language or computer language, in any form or by any means, without prior
written permission of Rosemount.

While great efforts have been made to assure the accuracy and clarity of this document, Rosemount assumes no
liability resulting from any omissions in this document, or from misuse of the information obtained herein. The
information in this document has been carefully checked and is believed to be entirely reliable with all of the
necessary information included. Rosemount reserves the right to make changes to any products described herein
to improve reliability, function, or design, and reserves the right to revise this document and make changes from
time to time in content hereof with no obligation to notify any persons of revisions or changes. Rosemount does not
assume any liability arising out of the application or any use of any product or circuit described herein; neither
does it convey license under its patent rights or the rights of others.

Warranty

SPECTREX agrees to extend to Purchaser/Distributor a warranty on the SPECTREX supplied components of the
SharpEye products. SPECTREX warrants to Purchaser/Distributor that the products are free from defects in
materials and workmanship for a period of five (5) years, commencing with the date of delivery to
Purchaser/Distributor. SPECTREX expressly excludes damage incurred in transit from the factory or other damage

due to abuse, misuse, improper installation, or lack of maintenance or “Act of God” which are above and beyond

its

control. SPECTREX will, upon receipt of any defective product, transportation prepaid, repair or replace it at its sole

discretion if found to have been defective when shipped. Said repair or replacement is SPECTREX’S sole liability

under this warrant

y and SPECTREX’S liability shall be limited to repair or replacement of the component found

defective and shall not include any liability for consequential or other damages. The customer is responsible for all
freight charges and taxes due on shipments both ways. This warranty is exclusive of all other warranties express or
implied.

TM40/40UFI Rev. (Ai), February 2019

«
1
2
3
4
5
...
»

Содержание SharpEye 40/40UFI





















































































Отзывы:

Нет отзывов

Похожие инструкции для SharpEye 40/40UFI

Бренд: DW Страницы: 32

Бренд: C&K systems Страницы: 28

Бренд: C&K systems Страницы: 2

DUAL TEC DT-900 Series

Бренд: C&K systems Страницы: 2

Бренд: C&K systems Страницы: 40

Бренд: Lamperd Страницы: 16

Бренд: Abus Страницы: 2

Бренд: Vanderbilt Страницы: 4

Бренд: i-PRO Страницы: 2

Бренд: Samsung Страницы: 1

Бренд: ACS Страницы: 64

Бренд: eZLO Страницы: 10

Бренд: Q-See Страницы: 20

Бренд: Alecto Страницы: 12

Бренд: Servodan Страницы: 6

UAV-GA-T-2030TA

Бренд: Dahua Страницы: 17

Бренд: Pix Controller Страницы: 21

Бренд: Zuden Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды