SpectraLink SpectraLink 6300 MCU Скачать руководство пользователя страница 2

SpectraLink 6300 MCU: OAI Installation and Configuration: SpectraLink 6000 System 

PN: 1725-36124-001_E.doc 

Trademark Information 

Polycom® and the logo designs  
SpectraLink® 
LinkPlus 
Link  
NetLink  
SVP 
Are trademarks and registered trademarks of 
Polycom, Inc. in the United States of America 
and various countries. All other trademarks 
used herein are the property of their respective 
owners. 

Patent Information 

The accompanying product is protected by one 
or more US and foreign patents and/or pending 
patent applications held by Polycom, Inc. 

Copyright Notice 

Copyright © 1998 to 2008 Polycom, Inc.  
All rights reserved under the International and 
pan-American copyright Conventions.  
No part of this manual, or the software 
described herein, may be reproduced or 
transmitted in any form or by any means, or 
translated into another language or format, in 
whole or in part, without the express written 
permission of Polycom, Inc. 
Do not remove (or allow any third party to 
remove) any product identification, copyright or 
other notices. 
Every effort has been made to ensure that the 
information in this document is accurate. 
Polycom, Inc. is not responsible for printing or 
clerical errors. Information in this document is 
subject to change without notice and does not 
represent a commitment on the part of Polycom, 
Inc.  

Notice 

Polycom, Inc. has prepared this document for 
use by Polycom personnel and customers. The 
drawings and specifications contained herein 
are the property of Polycom and shall be neither 
reproduced in whole or in part without the prior 
written approval of Polycom, nor be implied to 
grant any license to make, use, or sell equipment 
manufactured in accordance herewith. 
Polycom reserves the right to make changes in 
specifications and other information contained 
in this document without prior notice, and the 
reader should in all cases consult Polycom to 
determine whether any such changes have been 
made. 
No representation or other affirmation of fact 
contained in this document including but not 
limited to statements regarding capacity, 
response-time performance, suitability for use, 
or performance of products described herein 
shall be deemed to be a warranty by Polycom 
for any purpose, or give rise to any liability of 
Polycom whatsoever. 

Contact Information 

Please contact your Polycom Authorized 
Reseller for assistance. 
Polycom, Inc. 
4750 Willow Road,  
Pleasanton, CA 94588 

http://www.polycom.com

 

Содержание SpectraLink 6300 MCU


















Отзывы: