manualshive.com logo in svg

SpectraLink SpectraLink 6300 MCU, Руководство по установке и настройке, Страница: 13 / 17

Поделиться
Скачать
SpectraLink SpectraLink 6300 MCU Скачать руководство пользователя страница 13

Install and Configure OAI Card(s) 

PN: 1725-36124-001_E.doc 

13

Configure COM Port for OAI 

Either RS-232 port on the System Controller can be used for OAI. If a 
modem or administration console is connected to the MCU, it must 
use COM port 

A

 in which case OAI would use COM port 

B

. The COM 

port on an Expansion Shelf can also be assigned to OAI. 
To support OAI, one of the COM (RS-232) ports on the MCU must be 
configured as the OAI port via the following procedure. 

1.

 

On the Operator’s Console, select 

COM Port Administration

 (F10). 

2.

 

Select the COM port to be assigned to OAI and press Enter. 

3.

 

In the sub-menu, select 

OAI

, and press Enter. 

The selected port is now configured as the OAI port. 

Connect the Application Server to the MCU 

Using a standard RS-232 cable, connect the System Controller COM 
port configured for OAI to the OAI application server, PC, or modem 
that will be used to interface with the application. 

Содержание SpectraLink 6300 MCU


















Отзывы:

Нет отзывов