PN: 1725-36124-001_E.doc
11
Install and Configure OAI Card(s)
The Open Application Interface (OAI) allows the SpectraLink 6300
MCU to interface with an application server. This connection enables
third-party applications to communicate directly with the SpectraLink
6300 MCU, allowing users to retrieve and respond to information
using handsets.
Before loading OAI, the SpectraLink 6000 System should be
configured and operational, the Base Stations should be installed and
tested, and the handsets should be registered and tested.
If you are upgrading an existing system to support OAI, perform
Upgrade System to Support OAI
first, then proceed with the
installation steps:
•
Verify System and Cabinet Controllers Support OAI
•
Configure COM Port for OAI
•
Connect the Application Server to the MCU
•
Assign Function Key to OAI
If you have a new system with an OAI card (CSO3xx), set up the
system and then proceed with setting up OAI as outlined above.
Upgrade System to Support OAI
This procedure explains how to install the new controller cards to
support OAI.
The system must be powered down to complete this process. Users
will be unable to use their handsets during this installation.
Dump (back up) system configuration
From the Operator’s Console
Supervisor State Display
screen (F1) press
Enter to display the menu.
3