SpectraLink IP-DECT SERVER 400 Скачать руководство пользователя страница 207

Страница: 207 / 221

14215700-IG, Edition 7.0
January 2018, Original document

207

Field

Setting

Standby text (Optional)

Enter a standby text.

A standby text is a fixed label shown in the top left part of the
screen on the DECT handset when in idle state.

Note

: This feature is only available if Spectralink DECT hand-

sets are being used. If third party DECT handsets are being sub-
scribed, this feature is not supported.

Disabled (Optional)

If enabled, the user is disabled.

Note

: A disabled user cannot make calls from the handset.

User - SIP

Username/Extension

Must contain information used for SIP registration etc. E.g. the
"user" in a SIP URI.

Domain (Optional)

Enter the domain part of a SIP URI.

E.g. example.org in

John Doe<sip:[email protected]>

Note

: If not configured, the default domain entered under SIP

configuration will be used.

Displayname (Optional)

Enter the name of the user (e.g. caller ID).

E.g. John Doe in

John Doe<sip:[email protected]>

Note

: If Cisco license is loaded, the Cisco Unified CM will not

use this, but it may ease the administration of users within the
Spectralink IP-DECT Server.

Authentication user (Optional)

Enter the user ID of the end user.

E.g.

JohnDoe

5208

Note

: The user name will override the Default User field under

SIP Configuration.

Priority:

1. Authentication user set for individual users

2. Authentication user set in server SIP settings

3. User name set for individual users

Authentication password
(Optional)

Enter the digest credential of the end user.

Note

: The password will override the Default Password field

under SIP Configuration.

Spectralink IP-DECT Server 400/6500 Installation and Configuration Guide

Содержание IP-DECT SERVER 400






























































































































































































































Результаты поиска

Содержание IP-DECT SERVER 400

Отзывы:

Бренды по названию

Популярные бренды

SpectraLink IP-DECT SERVER 400, Руководство по установке и настройке

Результаты поиска

Содержание IP-DECT SERVER 400

Отзывы:

Бренды по названию

Популярные бренды