SpectraLink IP-DECT SERVER 400 Скачать руководство пользователя

Страница: 188 / 221

14215700-IG, Edition 7.0
January 2018, Original document

188

Field

Setting

General Configuration - IPv6

Method (Optional)

Default value: Disabled

If not using IPv4, select

Static

to set the following settings

manually: IPv6 address, Subnet Prefix Length, Default Gate-
way, Primary DNS Server, and Secondary DNS Server.

Other possible settings are:

Stateless Address Autoconfiguration (SLAAC)

: An

IPv6 address is automatically generated based on the
prefix being advertised on the connected network.

Statefull (DHCPv6)

: IPv6 address, DNS servers and

DNS search list will be obtained from router.

Address/prefix (Optional)

It is possible to enter a prefix (Static IPv6 address with an
optional prefix length).

Address and prefix length must be separated by:

Default gateway (Optional)

Enter IP address of the default gateway. The default gate way
serves as an access point to another network.

General Configuration - Ethernet

VLAN (Optional)

It is possible to enter the VLAN Identifier (VID) according to
IEEE 802.1Q specifying the VLAN to which the device belongs.

Note

: If this setting is used, network access from outside the

VLAN is no longer possible.

The Spectralink IP-DECT Server 400/6500 supports 4094 dif-
ferent VLANs.

Possible values: 1-4094

General Configuration - DNS

(Domain Name System)

Hostname (FQDN)(Optional)

The hostname (Fully Qualified Domain Name) will be inserted
into the SIP Contact and via headers. The hostname will also
be published via DHCP, and if the network infrastructure sup-
ports it, the device will be reachable via this hostname.

E.g. Example.spectralink.com

Search Domain (Optional)

Domain name used for resolving host names without a domain.

If no domain is entered, enter the domain name of the system.

Note

: Irrelevant if a FQDN is intered in the

Hostname

field

above.

Primary Server (Optional)

Enter the IP address of the Primary DNS server.

Spectralink IP-DECT Server 400/6500 Installation and Configuration Guide

Содержание IP-DECT SERVER 400






























































































































































































































Результаты поиска

Содержание IP-DECT SERVER 400

Отзывы:

Похожие инструкции для IP-DECT SERVER 400

Бренды по названию

Популярные бренды

SpectraLink IP-DECT SERVER 400, Руководство по установке и настройке

Результаты поиска

Содержание IP-DECT SERVER 400

Отзывы:

Похожие инструкции для IP-DECT SERVER 400

Бренды по названию

Популярные бренды