Spectral Products AD111, Руководство пользователя

Страница: 17 / 25

Getting Started
Spectral Products
3.5.2. Data Collection Parameters
Actual HV displays the voltage supply to the PMT.
Current
λ
displays the current wavelength of the monochromator
UNIT displays the current units used in the graph and the scan setup screens. (Selectable
for CM only under menu item CmDk:Units .)
Time delay sets a pause in ms between the grating step and data
acquisition. The default value is 0.
There are two options for data collection: ZeroScan and Scan . To activate one of the options first select the
collection type , second, click on ENTER button.
ZeroScan –
Scans the monochromator above and below zero order with the number of
steps in the ‘Steps Below 0’ box.
Scan – Scans the monochromator from the ‘Start’ to the ‘End’ wavelength, with the
increment in ‘Step’.
Gr/mm
displays the current grating ruling
(groove/mm).
Grating # displays the number of the current grating
(selectable under menu item CmDk:Select )
Info allows choice of display
between monochromator serial
number, the number of gratings,
or the blaze wavelength of the
selected grating.
Error shows red if an error occurred
Steps Below 0:
use to set the number of steps below and above 0nm for zero scan.
Turrets (DK models only): use to activate the specified turret in zero scan mode. The selections are:
0: Turret 1&2 (Double monochromator only)
1: Turret 1 (default)
2: Turret 2
Spectral Products
2659 Pan American Fwy, Suite A, NE Albuquerque, NM 87107 Ph. (505) 343-9700 Fax (505) 343-9705
17
ZeroScan