Model 9289
Spectracom Corporation
NetClock/NTP Network Time Provider Instruction Manual
3-2
When configuring a NetClock without DHCP, or to configure a NetClock that has not been
assigned an IP address, refer to
Network Configuration
, Section 3.2.
3.1
Network Configuration with DHCP
Once connected to the DHCP server through the
network, the NetClock is assigned an IP address. This
address and other network information is displayed on
the front panel when the device boots up. Enter the IP
address in your browser (on a computer connected to
the network) and log in as an administrator. The http
session will be redirected automatically to an https
session and a security certificate pop-up window will be
displayed. Accept the certificate by clicking “OK.”
NOTE:
Unless you are using DNS in conjunction with
DHCP (with the client configured using the
NTP server's hostname instead of IP address),
DHCP must be disabled and the IP address
must be changed to a static address once the
NetClock is properly configured. Failure to do
this will result in a loss of time synchronization
if the DHCP server assigns a new IP address
to the NetClock.
Figure 3-2: Web Browser User Interface (Web UI)
Your login name is admin
The password is admin123
Содержание 9289
Страница 18: ...Model 9289 Spectracom Corporation NetClock NTP Network Time Provider Instruction Manual 1 8...
Страница 36: ...Model 9289 Spectracom Corporation NetClock NTP Network Time Provider Instruction Manual 2 18...
Страница 154: ...Model 9289 Spectracom Corporation NetClock NTP Network Time Provider Instruction Manual 3 118...
