Replace a Boot Drive in the Verde 4U Master Node
Replace a Boot Drive
October 2013
Boot Drive Replacement
—
Spectra nTier Verde Array
13
14.
Orient
the
array
cover
over
the
chassis
with
the
tabs
facing
toward
the
front
of
the
array.
15.
Insert
the
tabs
into
the
slots
in
the
chassis
and
rotate
the
cover
down.
16.
Using
a
#1
Phillips
screwdriver,
install
the
four
screws
to
secure
the
cover
to
the
array
(see
and
Reinstall the Array in a Rack
Use
the
instructions
in
this
section
to
reinstall
the
array
in
a
rack.
1.
Pull
the
center
section
of
the
outer
rails
out
of
the
rack
until
they
are
fully
extended
(see
Figure 12
Orient the cover with the tabs facing to the front of
the array.
Front of array
Warning
The Spectra nTier Verde array weighs between 57 lb (25.8 kg) and 136 lb (61.9 kg)
depending on how many drives are installed. Use extreme caution when moving it.
Always use two people, one on each side, when lifting or moving it.
WARNUNG
Die Spectra nTier Verde wiegt zwischen 25,8 kg und 61,9 kg je
nachdem, wie viele Laufwerke installiert sind. Seien Sie besonders vorsichtig, wenn
Sie es bewegen. Immer zwei Personen, eine auf jeder Seite, beim Heben oder
Bewegen.