Spectra Watermakers CATALINA 300 MPC-5000, Инструкция по установке и эксплуатации

Страница: 12 / 63

12
Plumbing
From the inlet thru-hull to the flush module and from the flush module to the pump module
inlet, use supplied clear
3
/
4
” (19 mm) spiral suction rated hose. The outlet of the filter assembly
on the main module to the Clark Pump assembly is under pressure. Use the supplied braided
clear vinyl hose rated to 150 PSI (11 bar). From the Clark Pump brine discharge connector, use
supplied
5
/
8
” (15.9 mm) clear braided vinyl hose.
The remote control panel can be mounted anywhere that
is dry and convenient. Cut a 4
9
/
16
” (116 mm) wide by
2
7
/
8
” (68 mm) high opening for the panel. Locate in an
area that is easily visible and easy to manipulate the but-
tons.
Use only Spectra approved remote cable.
The cable is not standard LAN cable or phone cord.
Remote Control Panel
NOTE: Route all hoses and tubes to prevent kinks and restrictions. Secure piping away
from moving objects such as engine belts and hatches. Prevent chafe on tubing as re-
quired. Test and inspect all piping and hose clamps after several hours of operation.