Chapter 2. Troubleshooting the RXT150
9
Using the Force Eject Utility
1.
Log in to the RLC as a user with Administrative privileges.
2.
Select
Maintenance > Tools
. The RXT Utilities screen appears (Figure 2-1).
3.
Select
Load/Unload Media Pack
. The screen refreshes to show the details of the
utility (Figure 2-1).
4.
Select
Unload RXT Media pack
, then select
force
.
5.
Select
Run
.
• If this operation is successful, the RXT media pack ejects from the RXT150,
and the Load/Unload RXT Media Pack screen appears, confirming that the
pack is not longer loaded.
• If this operation is not successful, the RLC presents an error. Proceed to
Holding the Load/Unload Button
on page 10.
6.
Select
Finish
to complete the operation.
Figure 2-1
The RXT Utilities screen, showing the Load/Unload RXT Media Pack utility.
