background image

Notices

2

Notices

Except as expressly stated herein, Spectra Logic Corporation makes available its products and associated documentation on an “as is” basis, 
without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability and 
fitness for a particular purpose. In no event shall Spectra Logic be liable for any loss of profits, loss of business, loss of use of data, interruption of 
business, or for indirect, special, incidental, or consequential damages of any kind, even if Spectra Logic has been advised of the possibility of such 
damages arising from any defect or error.

Information furnished in this guide is believed to be accurate and reliable. However, no responsibility is assumed by Spectra Logic for its use. 
Because of continuing research and development, Spectra Logic may revise this publication from time to time without notice, and reserves the 
right to change any product specification at any time without notice.

RXT is a trademark of, and Spectra, SpectraGuard, SpectraLogic, and the Spectra Logic logo are registered trademarks of Spectra Logic 
Corporation. Some products or services mentioned in this guide are provided by companies other than Spectra Logic. Inquiries about one or more 
of these products or services should be sent directly to the company in question. These brand or product names, registered trademarks, and 
trademarks are property of their respective owners. These trademarks may be registered in this country, other countries, or both.

Spectra RXT Troubleshooting Guide

Copyright © 2007 Spectra Logic Corporation. All rights reserved.

License

You have acquired Spectra Logic products that include software owned by or licensed by Spectra Logic from one or more software licensors 
(Software Suppliers). Such software products, as well as associated media, printed materials and “online” or electronic documentation (Software) 
are protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The Software is 
licensed, not sold.

If you do not agree to this End User License Agreement (EULA), do not use the Spectra Logic product. Instead, promptly contact Spectra Logic 
for instruction on return of the product for a refund. Any use of the Software, including but not limited to use of the product, will constitute your 
agreement to this EULA (or ratification of any previous consent).

GRANT OF LICENSE. The Software is licensed, not sold. This EULA grants you the following rights to the Software:

• You may use the Software only on the Product with which it was sold.

Not fault tolerant

. The Software is not fault tolerant. Spectra Logic has independently determined how to use the Software in the 

product, and suppliers have relied upon Spectra Logic to conduct sufficient testing to determine that the Software is suitable for 
such use.

No warranties for this software

. The Software is provided “as is” and with all faults. The entire risk as to satisfactory quality, 

performance, accuracy, and effort (including lack of negligence) is with you. Also, there is no warranty against interference 
with your enjoyment of the Software or against infringement. If you have received any warranties regarding Software, those 
warranties do not originate from, and are not binding on, Software Suppliers.

Note on Java support

. The Software may contain support for programs written in Java. Java technology is not fault tolerant and is 

not designed, manufactured, or intended for use of resale as online control equipment in hazardous environments requiring 
fail-safe performance, such as the operation of nuclear facilities, aircraft navigation or communication systems, air traffic 
control, direct life support machines, or weapons systems, in which the failure of Java technology could lead directly to death, 
personal injury, or severe physical or environmental damage.

No liability for certain damages

. Except as prohibited by law, Software Suppliers shall have no liability for any indirect, special, 

consequential or incidental, damages arising from or in connection with the use or performance of the Software. This limitation 
shall apply even if any remedy fails of its essential purpose. In no event shall Software Suppliers, individually, be liable for any 
amount in excess of U. S. two hundred fifty dollars (U.S. $250.00).

Limitations

 

on reverse engineering, decompilation, and disassemly

. You may not reverse engineer, decompile, or disassemble the 

Software, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this 
limitation.

Software

 

transfer allowed with restrictions

. You may permanently transfer rights under this EULA only as part of a permanent sale 

or transfer of the Product, and only if the recipient agrees to this EULA. If the Software is an upgrade, any transfer must also 
include all prior versions of the Software.

Export restrictions

. Export of the Software from the United States is regulated by Export Administration Regulations (EAR, 15 CFR 

730-744) of the U. S. Commerce Department, Bureau of Export Administration. You agree to comply with the EAR in the export 
of re-export of the Software: (i) to any country to which the U.S. has embargoed or restricted the export of goods or services, 
which as of May 1999 include, but are not necessarily limited to Cuba, Iran, Iraq, Libya, North Korea, Sudan, Syria, and the 
Federal Republic of Yugoslavia (including Serbia, but not Montenegro), or to any national or any such country, wherever 
located, who intends to transit or transport the Software back to such country; (ii) to any person or entity who you know or 
have reason to know will utilize the Software or portion thereof in the design, development or production of nuclear, chemical, 
or biological weapons; or (iii) to any person or entity who has been prohibited from participating in U.S. export transactions by 
any federal agency of the U.S. government. You warrant and represent that neither the BXA nor any other U.S. federal agency 
has suspended, revoked or denied your export privileges. For additional information see: http://www.microsoft.com/exporting.

Содержание Spectra RXT Media












































Отзывы: