6
CoD Feature for the Spectra 2000 Library
Locate the Library Identifier via HTTP Interface
Note:
If you do not know the IP address of the library you would like to
configure, you will need to configure it via the serial port.
1.
Open your Internet browser.
2.
In the Address field, enter the IP address of the device you would like to
configure. The Configuration Utility screen appears (Figure 1).
Note:
Where the words
FIREFROG “FIREFROG-6”
appear in the screen above,
your screen will instead show the device name for your library as
was assigned by the administrator.
3.
Select the
Configure
button.
Figure 1
The Configuration Utility screen.
