Chapter 4 - Installation
This chapter describes the installation process for a Spectra BlackPearl NAS solution.
The BlackPearl NAS solution 96-bay or 107-bay expansion nodes are installed by Spectra
Logic professional services and are not covered in this guide.
WARNING
Do not attempt to install a Spectra BlackPearl NAS 96-bay or 107-bay expansion
node on your own. The BlackPearl 96-bay expansion node can weigh up to 269.8 lb
(112.9 kg) and must be installed by Spectra Logic Professional Services. The 107-bay
expansion node can weigh up to 265 lb (120.2 kg) and must be installed by Spectra
Logic Professional Services.
WARNUNG
Versuchen Sie nicht, einen 96-Bay- oder 107-Bay-Erweiterungsknoten
Spectra BlackPearl NAS selbst zu installieren. Der BlackPearl-Erweiterungsknoten mit
96 Einschüben kann bis zu 112,9 kg (269.8 lb) wiegen und muss von Spectra Logic
Professional Services installiert werden. Der Erweiterungsknoten mit 107
Einschüben kann bis zu 120,2 kg (265 lb) wiegen und muss von Spectra Logic
Professional Services installiert werden.
Installing an HBA in the Master Node
Installing the Spectra BlackPearl NAS Solution in a Rack
Connecting the Interface Cables
Automatically Import Activation Keys
Installation
Use the information in this section to install a BlackPearl NAS solution chassis in a rack , or if
you need to move and reinstall the chassis. If you do not have to install an HBA, continue to
Installing the Spectra BlackPearl NAS Solution in a Rack on page 35
- 27 -