Chapter 4 - Installation
Installing an HBA in the Master Node
Installing an HBA in the Master Node
The BlackPearl NAS solution master node ships with the 10 GigE HBA installed, if one was
purchased with your order. If there are one or more SAS or 40 GigE HBAs included with the
shipment, use the instructions in this section to install them.
Gather Materials and Tools
Required
• A grounded anti-static wristband
• A #2 Phillips screwdriver
• One or more 40 GigE HBA from Spectra Logic (
PN 90999713, not shown
)
• One or more SAS HBA from Spectra Logic
(PN 90999693 or 90999719)
Figure 7
The SAS HBA.
Note:
The SAS card you receive may look different than the one pictured above.
Recommended
• An anti-static mat
• A static protection wristband or grounding footstrap
January 2022
Installation Guide-Spectra BlackPearl NAS Solution
- 28 -