Spectra Logic BlackPearl NAS Скачать руководство пользователя страница 57

Страница: 57 / 57

Chapter 4 - Installation

Installing the Front Bezel

Installing the Front Bezel

The front bezel attaches to the chassis using magnets.

Orient the front bezel so the Visual Status Beacon light bar is closest to the top and the
Spectra logo is not upside down.

Figure 45

The front bezel.

Install the front bezel over the front of the chassis. The magnets hold it in place.

Next Steps

Your BlackPearl NAS solution is now installed. For information about configuring and using
the system, read the following chapters in the

Spectra BlackPearl NAS Solution User Guide

• Read “Initial Configuration” to learn about the required steps to configure the BlackPearl

NAS solution.

• Read “Configuring Network Attached Storage” to learn about configuring storage pools

and sharing volumes.

• Read “Configuring a BlackPearl NAS solution” to learn how to configure network

connections and other settings.

• Read “Monitoring a BlackPearl NAS solution” to learn about day-to-day monitoring and

operation.

• If you purchased a HotPair BlackPearl NAS solution, read the

Spectra BlackPearl HotPair

Installation & Configuration Guide

for information about configuring a HotPair BlackPearl

NAS solution.

January 2022

Installation Guide-Spectra BlackPearl NAS Solution

- 57 -

Содержание BlackPearl NAS


























































Результаты поиска

Содержание BlackPearl NAS

Отзывы:

Похожие инструкции для BlackPearl NAS

Бренды по названию

Популярные бренды

Spectra Logic BlackPearl NAS, Руководство по установке

Результаты поиска

Содержание BlackPearl NAS

Отзывы:

Похожие инструкции для BlackPearl NAS

Бренды по названию

Популярные бренды