Spectra Logic 90841625, Инструкция по установке

Страница: 9 / 10

Gripper Jaws Replacement Guide for Spectra Logic Libraries Page 9
Finish
Replace the top cover
1. Place the top cover on the library; leave about 1 inch of space between the front of the cover and the
front panel.
2. Use both hands and lightly squeeze the front sides of the cover together and slide the cover forward.
Be sure the clips on the cover engage the front panel.
3. On library covers with phillips head captive screws, use the #1 phillips screwdriver to tighten these
screws.
On libraries with removable flat blade thumb screws on the cover, start all the screws first, with a few
turns, before you tighten any of them with the screwdriver. Doing it this way, insures that all the holes
on the cover will meet the screw holes on the library.
Return the library to service
1. Return the library to its normal operating position.
Warning: The library is heavy, about 56 pounds. Get help moving the library.
Alert: If the computer equipment was restarted while the library was away, you must exit all programs
and shut down all equipment before connecting the library.
2. Reconnect all cables to the library.
3. Power on all computer equipment and start all applications including your backup utility software.
Return the tapes to the library
If you removed any tapes from the library, re-introduce those tapes into the library now.