directly on your vehicle’s sound system.
4. Operation in vehicle
a.
Open your audio devices’ music application
b.
Play/pause and skip song functions MUST be controlled EITHER directly on your connected
audio device, or by using the
T249
multi-function button
c.
Quick swipe multi-function button right to skip to next song & quick swipe multi-function button
left to skip to previous song
WARNING:
do NOT swipe & hold buttons when
T249
is connected to your vehicle. This
will change the FM frequency and your connection will be lost.
d.
Press green button on T249 speaker to answer calls & press red button on
T249
speaker to
end calls (phone call is accepted on your vehicle’s audio system)
NOTE: once the T249 is connected to your vehicle’s audio system, the sound output will adapt to your
vehicle.
5. Operation in memory card mode
Once the MSD card is inserted into card slot, “SP” (speaker) will appear in the LED window to display
speaker is ready to play songs.
Use multi-function button (button 3 in product map) for all functions below
a.
Press down quickly to play/pause
b.
Swipe right to skip to next song
c.
Swipe right & hold to increase the volume
d.
Swipe left to skip to previous song
e.
Swipe left & hold to decrease the volume
NOTE: to disconnect from the MSD card mode, remove card from memory card slot
To Re-charge T249
In your vehicle
1.
Plug-in car charger (included) into your vehicle
2.
Use included charging cable & insert micro-USB (located on #2 in Product Map diagram) into
T249 & USB output into car charger (vehicle must be in use to re-charge
T249
speaker
3.
A red LED charging light will appear to indicate that the speaker is in charging mode. The red
LED light will turn off when speaker is fully charged.
4.
To charge another device (smart phone or mini tablet) while the
T249
is being recharged, plug the
devices’ USB charging cable directly into the speaker’s USB input port (located on #10 in Product
Map diagram)
Other Charging Method
1.
Insert micro USB cable into the
T249
& connect the USB output to a wall adapter (not included)
2.
Red LED indicates the device is charging (Red LED will turn OFF once fully charged)
