SPECS CCX 70, Руководство пользователя

Страница: 6 / 40

CCX 70
V1.1 | 29 April 2016
1.3 Safety
The document "Safety Instructions" is contained with this instrument. This contains important
warnings and procedures that you should adopt when using SPECS equipment.
In addition to the advice in the safety instructions, warnings and cautions are included in this
manual at appropriate places. Please observe these warnings for your own safety and to
ensure reliable operation of the equipment.
Danger—High Voltages Present!
Beware! Hazardous voltages are present. Lethal high voltages up to 15 kV
are applied to the X-ray source.
The water and voltage conduit from the CCX 70 carries high voltages up to 15 kV! It is important
to comply with the following safety directives:
Ÿ Use only original cables, connectors, and flexible conduits supplied by SPECS. Make sure
that all cables and water lines are without physical or electrical defects.
Ÿ Make sure the power supply is grounded with a proper HF cable.
Ÿ
Only operate the source with the protection cap in place. Do not modify the protection cap
in any way.
Ÿ Do not override or defeat the interlocks in any way.
Ÿ Never operate the power supplies with the case open.
Ÿ Connect the high voltage cable only when the power supplies are turned off.
Ÿ
After switching off the power units, wait a minimum of 3 minutes before making dis-
connections or opening power supplies or the X-ray source protection cover.
Ÿ In the event of a water leak in the CCX 70, make sure that all parts are dry before attempt-
ing to operate the source again.
Ÿ Operating the CCX 70 with equipment other than that delivered by SPECS may void your
warranty. Contact SPECS for advice.
If you need to return the instrument to SPECS for repair, please fill out the declaration at the
end of this manual.
2