87
REMOTE CONTROLLER ID
: Sets an ID number of which remote control to receive commands.
SENSOR:
Select the type of sensor.
IEEE 802.3af PSE Status
: Table showing the status of all PoE devices connected to the NVR.
7-7-5. Display
Select the
DISPLAY
tab to set the DISPLAY conditions.
These settings apply to all channels.
OSD
: Sets whether to display or not date and time as well as channel number on the screen.
OSD CONTRAST
: Adjust the character contrast on the screen.
MAIN MONITOR SEQUENCE
: Setting for automatically switching the displayed video.
SEQUENCE DWELL TIME
: Sets the interval for automatically switching the screens.
SITE
: Name, Covert (These settings apply to the specified channel only).
7-7-6. Network
NETWORK TYPE (
Cannot be altered remotely
)
o
STATIC
: The address setting mode is manual. Input IP, Gateway, Subnet Mask, and NVR IP.
o
DHCP
: The address setting mode is automatic.
