34
OFF
: Daylight saving is turned off.
USA
: Applies the USA daylight saving time.
EU
: Applies the EU daylight saving time.
- Select the GMT AREA using the mouse or the remote control.
- Set the time difference with the standard time using the mouse or the button.
OTHERS
: If the time zone is neither USA nor EU, set the date and time of the daylight
saving period.
- Select BEGIN or END.
Caution
- Do not set the start time to 23:00 for DLS.
- DLS cannot be applied if the date of BEGIN and END is the same.
Client Access
Enable/Disable remote access through the network.
NTP
Setup
NTP (Network Time Protocol) which synchronizes the time of the computer systems over
variable-latency data networks.
PRIMARY SNTP SERVER
: Input the address of the primary NTP time-server.
SECONDARY SNTP SERVER
: Input the address of the secondary NTP time-server.
TIME ZONE
: NTP synchronizes with GMT (Greenwich Mean Time) regardless of
geography; user must select time difference from GMT.
CONNECTON MODE
: Select the NTP time-server connection mode from TIME,
INTERVAL, and ONCE.
CONNECTION PERIOD
-
TIME
– Refresh the time at the designated time (e.g. 1AM)
-
INTERVAL
– Every 1 hour ~ 24 hours
-
ONCE
– Synchronizes time only once. NTP will not synchronize unless the
Connection Mode is changed.
NU sends E-MAIL Notification when the NTP server time is faster than the system
time with below message.
“NTP server time is faster than the system time.
In this case, NTP server time is ignored to protect the user data.
User must set the time manually.
SYSTEM TIME: Mon Oct 10 13:46:49 2011
SERVER TIME: Mon Oct 10 13:33:12 2011
ID: NU
IP ADDRESS: 172.16.2.46
