22
Spearhead XRHD
250/270/300
5.4 Stability
of
the
tractor
At attachment of the machine on the tractor always take
care about allowed weight of the attachment and axle load.
First axle of the tractor should always be loaded with
min.20% of the weight of the tractor itself. This is very
important specially on this machine because of its
distance between the tractor and working part of the
machine!
6 Adjusting
and
Setting
Up
6.1 Working
height
adjustment
Height of cut depends on working conditions and volume of the
material. The height of cut can be regulated with the hydraulic system on
the tractor or/and with adjusted rear roller of the machine
(Fig. 13).
The
min. height of cut should be between 1-3 cm. The machine always run
on the rear roller and not on the skids.
Содержание XRHD 250
