background image

 

 

11

 

Spearhead XRHD

250/270/300

Safety 

 

 

3.1  General safety rules 

 
 

1. Before starting, checks on  the tractor and the machine must be 

carried out as regards: functionality, road safety, accident 
prevention rules. 

 
2. Together with the operating and maintenance rules for the 

machine it is necessary to consider general health and security 
rules and warnings. 

 
3. Before starting it is mandatory to know everything regarding the 

equipment and operating of the machine. Reading instructions 
among operating is too late. 

 
4. Security and warning decals on the machine are very important. 

Respect them always. 

 

5. Even when using the machine correctly, stones or other objects 

may be thrown on a long distance. Therefore nobody must stand 
within the danger area. Special attention must be paid when 
working near roads or buildings. 

 

6.   Use tractor with the cabin. 
 
7.  Whenever using public roads, respect traffic rules. 

 

8.  Never wear loose or fluttering clothes. 
 
9.  Keep the machine clean to avoid fire danger. 
 
10. Before starting check the surrounding area for the likely presence 

of children and/or animals. 

 
11.  Never carry passengers on the machine. 

 

 

Содержание XRHD 250









































Отзывы: