Spearhead Twiga 555, Руководство пользователя

Страница: 44 / 63

Spearhead TWIGA
43
Summary
You must ensure that the micro switches make and break a circuit as the cams rotate
through their arc of travel
. It is very important to correctly set the micro switches to
ensure the electrical circuit functions, the switch lever arm
must follow it’s own cam
and not be influenced by the opposite cam also the lever must be bent towards or
away from the cam to allow the electric circuit to open and close in accordance to the
cam position
Auto Pilot
When both switches are open the main arm
will hold position, this is neutral or mid
position when they rest in the valley between
both cam peaks.
Slacken this bolt before adjusting the position of cams,
increase sensitivity by moving the cam peaks together
reduce auto pilot sensitivity by moving them apart. We
recommend the cam plates are flush at the top as shown.
Ensure the switch lever
closes the contacts, if not
adjust by bending the lever
arm towards the cam.
Auto Pilot
When one of the switches is closed,
main arm will either raise or lower
dependant on which switch has been
triggered.
Fig. 3
Fig. 4