Spearhead Twiga 555, Руководство пользователя

Страница: 18 / 63

Spearhead TWIGA
17
Attaching your machine to the tractor – when using 3
Point Linkage
9. Reverse tractor and attach lower link arms by
inserting lower linkage pins into the bottom set of
holes.
10. Spearhead strongly recommend mounting the
control unit to the seat in place of the armrest to the
head side of the tractor. Modification and additional
bracket may need to be fabricated Consult your local
dealer for advice.
An electric 12-volt supply cable will be needed from a
30-amp source.
To power controls and a separate 12 volt supply
direct from the battery to the oil cooler.
11.
Fit stabiliser yoke to the tractor’s top hitch
bracket. Standard bracket Cat 3, use conversion
bush supplied for Cat 2, alternative bracket
available to suit 28mm.
12. Place the stabiliser tubes on to the
machine chassis using the pins. Engage the
stabiliser bars and attach to stabiliser yoke. Be
sure the stabiliser bars are free to slide. Do not
fit locking pins.