Spearhead Twiga 555, Руководство пользователя

Страница: 23 / 63

Spearhead TWIGA
22
Removing from the tractor
1. Select a level firm site such as a concreted surface.
2. Fit parking stands. Place the flail head on the ground approximately 1m out
from machine main assembly, to the rear.
3. Ensure head float is discharged and turned off.
4. The arms must be slewed back into transport position and the locking pin
fitted to slew post. (Fig 1)
5. Disengage PTO.
6. Slightly raise the lower lift arms with great care to enable the stabiliser locking
pins to be removed.
7. Lower all weight securely onto parking stands (Fig.2).
8. Stop engine; ensure all weight is off the tractor and machine hydraulics.
9. Remove stabiliser bars, lower link pins, PTO shaft and control unit from the
cab.
10. Remove top link.
11. Slowly drive tractor away.
Subsequent attachment to a different tractor
Follow the steps for “Attaching your Machine to the Tractor” (page 13).
The following steps MUST be followed in exactly the same
order in which they appear, with removal of the top link being
the last action before driving the tractor away.
Do not attempt to operate machine controls through the rear
cab window whilst standing on or amongst the linkage.
Fig. 1
Fig. 2